We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Your first step to an amazing career in Research and Development (R&D) at Procter and Gamble (P&G) starts with applying to this job.Associate Researcher is an entry level role for individuals who are competent in basic science and math and are inspired to apply those skills towards hands-on experiments. At P&G, a wide variety of R&D work is available to Associate Researchers, in the following major areas:Products ResearchDeeply understand our consumers and their needs to inform product design parameters for new or improved products.Product Formulation & DesignTranslates consumer needs into finished products that delight consumers using the best available technologies/chemicals/materials.AnalyticalUse lab equipment to solve tough technical problems via chemical, physical, mechanical, imaging, and other measurement capabilities.Packaging & Device DevelopmentCreates and improves packages and devices that delight consumers and retailers.Process Development & Pilot Plant OperationsTranslates ideas, concepts, and technologies into commercially feasible chemical and mechanical processes and scales them up from lab to pilot plant to manufacturing.So, when you apply, be sure to answer the questions to let us know which areas you have experience and which areas you are interested in.Though the type of work may vary, all Associate Researcher roles will provide competitive wages as well as the opportunity for you to do meaningful work from Day 1. You will work on current and future products and should have the curiosity to think of improved approaches to everyday problems. Of course, we will provide you the training needed for you to make an impact on Day 1 and beyond, because when you start a job at P&G, it can also be the start of yourP&G career filled with professional growth and new opportunities.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mason Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($49,427.00- $74,140.00) Target Bonus: % Req ID:25900 Job ResponsibilitiesSummary of Position:Maintenance Technicians will repair/maintain all production/facility equipment and perform project work. This position requires a high regard for safety at all times in performing any tasks associated with working for Harris Products Group. This person will work safely and supports safety within their team across the organization. Completes weekly maintenance schedule and makes safe, quality & timely repairs to ensure weekly production schedule is completed. Supports lean initiatives to facilitate team goals/metrics. Participates in team meetings and works on cost savings projects.Responsibilities:Completes weekly maintenance schedulePerforms preventative maintenance on equipmentSchedule repairs of equipmentPerforms fabrication, pipe fitting, welding, brazing & solderingOperates material handling equipment, scissor lift and manipulating man lift when neededWorks on team projects, Six Sigma projects and provides support for other team meetings and projects.Correctly fills our work orders and time sheetsJob RequirementsEducation and Experience:Required -High school diploma or general education degree (GED); and one to two years related experience and/or training; or equivalent combination of education and experience.Good trouble shooting skills in mechanical and pneumatic systems for production machinery and support equipment. Able to read and understand mechanical and pneumatic printsMust be computer literateOperate material handling equipment, scissor lift and manipulating man liftPreferred-Experienced in welding, fabricating and pipe fitting.Experience with Lean toolsAble to read and understand electrical, mechanical, hydraulic, and pneumatic printsUnderstand ladder logic for relays and PLCsFamiliar with Allen Bradley PLCs, SLC, Micro Logix and Control LogixFamiliar with Logix 500, Logix 5000 and RSLinxFamiliar with operation of HMIs (touch screens)Be able to install and set up AC & DC drivesFamiliar with NEC as applies to Industrial applicationsLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Become a Maintenance Technician and Power Up Your Career! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $18.00-$23.00/Hr.Up to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC5308 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

D-Shift Instrument / Electrician | PrimientAbout PrimientPrimient is a century old company with an entrepreneurial spirit. We are a leading producer of food and industrial ingredients made from plant-based, renewable sources. We deliver value through deep technical, commercial, and operational excellence that is backed by our long-standing corn wet milling heritage. Wherever we are in the process, from field to customer, our priorities are focused on ensuring we produce the safest, highest quality products through practices that uphold both our responsibility and commitments to the challenge and drive for excellence, our people and our planet. We are a privately held company with locations across the US, Mexico, Poland, and Brazil. We’re investing in our plants and people to unlock our potential in the industrial and food sectors. Guided by our values of Safety, Excellence, Integrity, and Growth, we’re focused on growing our business, our reputation, and the career of every teammate.D-Shift Instrument / ElectricianDayton, OHJoin Primient for a foundational manufacturing role. Our Instrument / Electrician position has great potential towards a fulfilling, well compensated career. From day one, you’ll earn a great wage and full benefits. As your skills grow, so will your base pay. Starting pay of $34.45/hr with opportunity to advance to $37with our pay for skill system.Benefits incl. Healthcare/Medical insurance, 401 K matching and non-contingent matching plans.Structured career progression and greater responsibilities. ABOUT PRIMIENTEstablished yet entrepreneurial: Primient is an industry leader with proven products, six manufacturing plants, 1500+ employees and deep roots in corn wet milling. Yet we’re also a brand-new company that is ready to drive change and create impact.Investing in the future of Dayton: We are making an unprecedent investment in our plant and people to create a state-of-the-art facility. It will be a rewarding place for people to work now and for generations to come.Poised for new era of success:our goal is to unlock the full potential of Daytonand our other US locations. The market is strong for our plant-based ingredients, which go into everything from sodas to hand cream and cardboard to clothing. As our business grows, our people will grow.THE OPPORTUNITYManufacturing careers that offer more: Instrument/Electricians in our Dayton Plant are responsible for the safe operation, electrical maintenance, and troubleshooting of a system that produces distinctive, high-quality ingredients and solutions to the food, beverage, and other industries. We use technology to turn raw materials into distinctive, high-quality ingredients for our customers. These ingredients add taste, texture, nutrition, and increased functionality to products that millions worldwide use or consume daily. ABOUT YOUFabricate, maintain, install, repair, calibrate, test, assemble, and inspect electrical installations, including pneumatic, electronic, regulating, and/or indicating instruments, equipment, and transmission and distribution systems.Work with electrical construction materials, equipment components, and devices such as conductors, grounding systems, conduit systems, lighting, control devices, circuit breakers, switch gear, switches, motors, generators, transformers, and timing devices. Work with materials necessary to install electrical power distribution and control systems.Work with instrument construction materials such as wire, pneumatic, electronic, and hydraulic components and metal, plastic, and glass materials used in connection with instrument work. Installs tubing in conjunction with instrument work.Uses hand and power tools common to electrical and Instrumentation work, such as electric drills, soldering and brazing equipment, a drill press, threading equipment, power saws, and bending equipment.Performs preventive maintenance and inspection on alarms, alarm panels, electrical interlocks, and other electrical safety devices.Work from drawings, repair, and operating instruction manuals, and written and oral instructions.Follows prescribed procedures for checking and testing electrical and instrument loops before production release.Keeps tools, equipment, and work area clean and orderly.Works with and assists other skilled tradesmen.Working knowledge of NFPA70EWorks under close supervision.Assists PCS engineer in maintaining electrical schematics, loop diagrams, calibration records, and other instrumentation and electrical documentation.D-ShiftD-Shift works a rotating schedule 2 days 6 am-2 pm, 1 day 2 pm-10 pm, 4 days 10 pm-6 am, 2 days off, 1 day 6 am-2 pm, 4 days 2 pm-10 pm, 1 day 10 pm-6 am, 2 days off, 4 days 6 am-2 pm, 2 days 2 pm-10 pm, 4 days off (Repeating every 28 days)This is a 365/24/7 Operating Plant – requiring weekends and holidays.Career Path & CulturePrimient is committed to a workplace that is all in – ensuring everyone has the opportunity to develop and shape a career that matters in an open culture which embraces equity, diversity and belonging. We challenge old ways of thinking; and encourage employee voices to be a guiding force for ongoing learning. Primient supports a culture of inclusion that respects individual strengths, views, and experiences. We believe our differences make better decisions, drive excellence, and deliver better business results. Primient employees experience autonomy and accountability in their role. Here, employees control their destiny as there is opportunity for career growth and pathways outside the norm.Diversity, Equity, Inclusion & BelongingWe are believers in the power of difference. We strive to represent the communities in which we operate and to provide an inclusive, welcoming environment for all. We want Primient to be a place where every employee feels they belong and knows they are seen, heard, valued and safe to speak up. Our aspiration is to unlock the full potential in diverse perspectives, while offering everyone an equal chance to grow, thrive and progress. Primient is an equal opportunity employer, committed to the strength of an inclusive workforce.California Consumer Privacy Act ("CCPA")The Company is committed to complying with the California Consumer Privacy Act (“CCPA”) and all data privacy and laws in the jurisdictions in which it recruits and hires employees. We collect the following categories of personal information for the purpose of hiring the best qualified applicants and to comply with applicable employment laws: Name and contact information; Job preference and work availability; Social Security Number and/or other identification information; Education and qualifications; Employment history and experience; Military service; Reference and background check information, including relevant criminal history and credit history; Social media information; Pre-employment test results; Post-offer medical examination information and results, including drug test results; Voluntary self-disclosure information regarding minority, veteran, and disability status; and Information provided by you during the hiring process.

Req ID:455514Address: 1725 Ridge Road Springfield, OH, 45502Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately Welcome to Love’s!Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better. Job Functions: Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine componentsAssist customers with roadside servicesProvide preventative maintenance servicesAbility to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Work a rotating schedule that alternates between day and night as needed.Ability to obtain a medical card through the Department of Transportation. (paid by Love’s) Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Business Unit Overview: Michael Foods, Inc. is a leader in the food processing and distribution industry with business in egg products, refrigerated grocery and potato products. We offer exciting job possibilities throughout our organization where you can enhance your career, sharpen your talents and make an impact. Join our company and be part of an innovative team that’s First in Food. Location Description: Michael Foods, Inc. located in the Village of West Jefferson, OH, is located just minutes from the western suburbs of Columbus and about 20 minutes to the west of downtown. We are proud to be Michael Foods’ most recent greenfield project, producing high quality protein shakes serving people all around the world. It’s our honor to continue our strong commitment to our employees, our community, and our environment. Responsibilities: This position is responsible for the management, training, scheduling and development of maintenance personnel providing support to the Maintenance areas at the West Jefferson, OH facility. This recently constructed facility is responsible for producing Premier Protein drinks.Tetra Pak and Aseptic Equipment PreferredSUMMARY:The Maintenance Supervisor is accountable for leading, directing, and supervisingplant reliability and maintenance personnel.The Maintenance Supervisor is responsible for keeping the equipment and facilities in optimum operating condition while on shift.The Maintenance Supervisor will be expected to run a professional quality maintenance team by exhibiting strong leadership abilities, setting expectations, and ensuring consistent communication with personnel.This position provides both Maintenance and Reliability services withinthe plant, championing executional excellence and asset health improvement efforts. The Maintenance Supervisor will ensure results while partnering with the MFI ARM team, plant maintenance team personnel, plant operational team, and all other plant support teams members for success.This role must be available to work scheduled work times, weekends, and holidays, as necessary.DUTIES AND RESPONSIBILITIES:Lead and supervise department team members to ensure personal safety, quality, delivery, and cost, are continuously being improved to achieve company objectives.Engage and develop the asset care team members to deliver expected levels of reliability.As part of the greater maintenance leadership team, be an active member who contributes to the MFI culture's advancement.Direct responsibility for the maintenance team members and their performance.Responsible for supervisingmaintenance or project contractors while onsite to include human safety, food safety, and plant GMP requirements.Responsible for all maintenance team metrics. Ability to balance maintenance (tactical and strategic) initiatives that align with plant business strategies while on shift.Assists with planning and cost estimates for annual and longer-term capital and operating budgets to deliver to business plan. Investigate the condition of buildings, equipment, and grounds, and recommend improvements in the facilities to ensure that business needs are met.Utilize MFI approved CMMS to manage, document, and support maintenance reporting and decision making. This will be accomplished through the guidance of MFI ARM standards.Keepsaccurate and up-to-date records (i.e., SAP data, Kronos, KPI’s, etc..).Works with planning and scheduling to utilize team personnel in a cost-effective manner.Adhere to establishedMFI standards for assessing the quality of work performed by employees and contractors.Supervise the completion of work through review of reports and frequent site inspections.Recognizes and takes steps to resolve operating problems to minimize their impact on the business.Provides input for root cause analysis (RCA) and reliability centered maintenance (RCM) to create an environment of continuous asset reliability improvement. Will champion the plant’s RCM and RCA process.Create and foster a team environment that demonstrates genuine concern for personal and professional development of all employees by providing team members opportunity for development to their full potential through the MFI ARMED program.Ability to coordinate and partner with corporate stakeholder groups to build and maintain programs and processes consistent with MFI standards.Promote, and foster Michael Foods culture, values, and principles.Act as a role model by demonstrating safe work behaviors.Assumes personal responsibility to ensure safe and healthy workplace for everyone. Adhere to all safety policies and procedures and incorporate safety and health in all jobs and tasks.Adheres to quality work practices, follows GMP’s, maintains sanitary conditions and ensures that product quality is maintained. Reports on any conditions or practices that may adversely affect food safety and quality.Always ensuresrequired regulatory compliance.Participate in acquiring talent within maintenance organization. Includes interviewing, recruiting, and selection for salaried and hourly team members. Actively support recruiting events and talent pipeline efforts.Perform other duties as assigned.#firstinpeople Qualifications: EDUCATION AND EXPERIENCE REQUIRED:Bachelor’s degree in engineering or technical field is preferred. Can also have an associate's degree, two-year technical certificate, and / or a relevant combination of experience which demonstratestechnical and leadership aptitude.Demonstrated leadership experience.Minimum of 5 years of proven leadership or supervisory experience in industrial operations or maintenance or utilities operations is preferredCertified Maintenance & Reliability Professional (CMRP) certification preferred.Understanding of PLC and equipment automation preferred.Trained and competent in MFI MTL1, MTL2, & MTL3 skills preferredPrior experience in SAP preferredAbility to interact with all levels of the organizationExcellent written and verbal communication skills along with superb time management skillsAbility to lead teams and hold team members accountable, while successfully achieving results through internal and external resourcesExcellent administrative and follow-up skills to achieve successful maintenance and repair programs.PHYSICAL REQUIREMENTS:While performing the duties of this job, the employee is regularly required to talk and listen. The employee frequentlyis required to stand and walk. The employee is occasionally required to sit; use hands to finger, handle, and feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; taste and smell. The employee must occasionally lift and/or move up to 60 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee will be exposed to a noisy environment that varies from hot to cold in temperature. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Equipment Service TechnicianLocation:East Liberty, OhioStarting Pay - $36.04 - $41.19 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

ALPLA is a global family-owned, privately held company that makes innovative, customized, recycled packaging for top companies such as P&G, Unilever, L'Oral, Pepsi, and more. ALPLA values their employees, work-life balance, personal growth, compensation and sustainability. What Can You Expect From ALPLA Health and Wellness Care Program- BenefitsChild Care BenefitsDependent Care Cost Savings ProgramRecognition programs; Promotional opportunities401K Retirement Plan and excellent Matching PlanMedical, dental, vision planEducation assistance program/tuition reimbursementShort term, long term and life insurance paid by ALPLAPaid vacation; paid holidays What Will You Enjoy Doing Servicing and maintaining machines on siteEnsuring preventive maintenance is performedEnsuring machine breakdowns are repairedEnsuring current and accurate record of maintenanceEnsuring all relevant manufacturer modifications and updates are performed/installedEnsuring a sound spare part warehouseMaintaining good housekeepingEnsuring availability of spare partsManaging contractors on siteEnsuring all employees understand and follow company policies and proceduresLeading the TeamEnsuring team works together as efficiently as possibleAssessing training needs of staff and ensuring execution of trainingEnsuring staff are brought in to cover absenteeism and holidaysCorrectly recording time and attendance of team Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonableaccommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job: The employee is regularly required to stand, walk, reach with hands and arms and very occasionally to climb or balance. The employee is frequently required to use hands to finger, handle, or feel; stoop, kneel, crouch, or crawl and talk or hear.The employee is occasionally required to sit.The employee must regularly lift and/ or move up to 10 lbs, frequently lift and/or move up to 30 lbs and occasionally lift and/or move more than 50 lbs.Specific vision abilities required by this job include close vision. It is required to act in a safe and environmentally responsible manner at all times by adhering to all ALPLA policies and procedures and Safety Standards (OSHA). #salaried #DAY ALPLA is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of Any Kind: ALPLA is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at ALPLA are based on business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, sex (including pregnancy), age, physical, mental or sensory disability, HIV Status, sexual orientation, gender identity and/or expression, marital, civil union or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. ALPLA will not tolerate discrimination or harassment based on any of these characteristics.What Makes You Great Four-year degree in mechanical engineering or equivalent experience preferredMinimum four years of work experience at ALPLA or similar industryExperience with Computer Control Systems on machinesExperience in working with hydraulic and pneumatic systemsHands on experience running busy engineering departmentAt least 3 years of supervisory experienceGood organizational skillsGood leadership skillsThorough understanding of technical aspects of different types of equipment

We are seeking experiencedCrew Leaders to work safely in the field for our Maintenance division.You will be a working team member who oversees all aspects of a crew from start to completion. What would my responsibilities be Supervise all lawn maintenance service activities of the crew,ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely.Complete a pre-trip inspection report each day.Coordinate with branch management, customers, and employees as needed.Use landscaping tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews.Why Join Yellowstone Competitive hourly pay,paid weeklyBenefits package including health, dental and vision insurance, 401k with a company matchIndustry-leading safety programsCompany provided safety gearEquipped with optimal and most professional equipmentHigh profile customers, worksites, and landscape results -A company that values and appreciates YOURequirementsLegal authorization to work in the United StatesExperience managing a crew consisting of laborers providing landscaping or related servicesMust have reliable transportation to the Branch or first job siteSafe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) requiredStrong English communication skills. Spanish a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. This is a traveling position that requires regular travel as a primary requirement of the role. Travel roles may require various degrees of travel up to 50% or more of the time. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $16.50 per hourGrowth opportunities abound – We promote from withinPaid travel with overnight staysNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersInterested in traveling within and outside of your home state, with overnight hotel staysAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

Our Veterinary Clinic Assistants help bring our Vet Clinics to life by interacting with Pet Parents as well as supporting the Veterinarians. The role includes safely retraining animals, dispensing and labeling medication as well as assisting pet parents with product recommendations and facilitating check out process. PetIQ provides convenient and affordable pet health and wellness products and veterinary services to pets and their families through retail and ecommerce channels across the country. We are advocates for pet parents, because we believe that all pet parents should be able to provide necessary care that enhances the lives of their pets. Job Overview Collect payment, dispense and label medication, and review discharge paperwork with pet parentsSafely restrain / hold pets for wellness procedures including vaccines, nail trims and microchippingCollect and prepare blood and fecal samples for laboratory testingDrive vans to and from clinics responsibly; load and unload the vans upon arrival anddepartureMake recommendations for services and products to every pet, every time, based on the pet’s lifestyle and an understanding of canine and feline diseasesMaintain a clean and sanitary work environment by disinfecting surfaces and equipment between each petAbility to execute inventory processes by maintaining accurate product counts and managing expiration dates for vaccines and productsPromote a culture of safety in your clinic and live our values while reinforcing our brand promise with pet parents, partners, and team membersProvide customer service to pet parents by answering questions and assisting them through the clinic processAchieve goals as set by your manager including dollars per pet, pets per clinic, preferred product and microchips soldScan pets for microchipsPrepare canine and feline vaccinesEstablish and maintain effective relationships with pet parents and partnersOther duties as assigned Minimum Qualifications: Must be 18 years of age or olderValid driver’s licenseMust be able to work weekends, varied weekdays and times, occasional overnightsReliable transportation to and from workPresent professional appearance and positive conductPunctuality and dependability highly valuedMust be able to drive a company vehicle for long hours and in various terrain and weather conditions. Portion of workday spent in vehicle.Some outdoor clinic work and activities may be necessaryMust be able to work for prolonged periods of time in the field, including 12–14-hour days Education Requirements: High School Diploma or equivalent required Preferred Qualifications: Previous customer service sales experience Navigate computer software (iPad, Bluetooth devices and more)Strong organizational, problem-solving, and analytical skillsAbility to work within a team to meet team goals and objectivesComfort level in approaching host location’s customers to educateabout our clinicsAbility to adapt to changing priorities Physical Requirements: Ability to perform the essential job functions consistently safely and successfully with the ADA, FMLA and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standardsAbility to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standardsMust be able to lift and carry up to 50 lbs. Why join the PetIQ Team Mission-Driven Impact: Join a team dedicated to helping pets live their best lives by providing affordable, innovative veterinary solutions.Innovative Culture: Be part of a company that challenges industry norms with creative and resourceful solutions.Collaborative Excellence: Thrive in an environment that values continuous improvement, high standards, and teamwork.Humble & Hungry Spirit: Work alongside passionate professionals committed to making a real difference in pet care. Closing: PetIQ is an Equal Opportunity Employer. We do not discriminate on the basis of race, color, religion, creed, national origin, ancestry, citizenship status, age, sex (including pregnancy, childbirth, breastfeeding, and related medical conditions), gender, gender identity, gender expression, sexual orientation, marital status, familial status, domestic partnership or civil union status, military or veteran status, disability, medical condition, genetic information, or any other characteristic protected by federal, state, or local law. We believe in providing equal opportunities for all qualified individuals and strive to create a work environment free from discrimination, harassment, and retaliation. If you require a reasonable accommodation during the application or employment process, please contact By submitting this application, I certify that my answers are true and complete to the best of my knowledge. If this application leads to employment, I understand that false or misleading information in my application or interview may result in my release.

This role is not open for submissions from outside staffing agencies 2nd Shift Maintenance Technician $1,500 Sign-On Bonus What Brought You Here Total compensation pay range: $26-$32/hr. depending on experienceShift differential $3.00Sign on Bonus $1,500Quarterly safety bonus opportunitiesWeekly pay Shift Days and Hours:2nd Shift (M-F, 2:00pm - 10:30pm)Benefits starting DAY ONE! Who You Are: The Ideal candidate will have 5+ years industrial maintenance experience in an industrial setting. Glass industry experience preferred. What You Will Be Doing: As a Maintenance Technician, you will be responsible for providing maintenance and repairs to our production equipment in order to ensure that production downtime is kept to a minimum. All activities must be performed according to corporate and plant safety standards. DUTIES AND RESPONSIBILITIES(other duties may be assigned): Advises management of new developments which may affect profit, schedule, costs, and/or departmental relations.Engages in mechanical and electrical repair and maintenance of electric-power generating equipment, and transmission, distribution, and control equipment of electric power utility.Confers with contractors to resolve problems in installation of new equipment, servicing, and repairing equipment and to assist in start of new plants or additions.Performs preventative and predictive maintenance on facility machinery.Communicate with operators from other shifts.Resolves problems using working knowledge and solutions that improve operations, and develops recommendations involving new techniques, technologies, or concepts.Maintains a working knowledge of safety policies and regulations to ensure duties of self and others are performed in a safe manner.Understand and analyze levels of line downtime caused by equipment issues and associated causation.Analyze test results, machine error messages, and information obtained from operators to diagnose equipment problems.Examine parts for defects such as breakage and excessive wear.Troubleshoot electrical, mechanical, pneumatic and hydraulic systems.Follow diagrams, sketches, operations manuals and manufacturer’s instructions.Diagnose CNC equipment and PLC control systems.Locate root problems and perform repairs.Operate newly repaired machinery and equipment to verify the adequacy of repairs.Report any faulty or inefficient equipment.Record repairs and maintenance performed, parts and materials used, requisition new parts and materials as necessary.Assist with the inventory of replacement parts and supplies by checking stock to determine inventory level.Control downtime by informing production workers of routine preventive maintenance.Operate cutting torches and welding equipment to fabricate, cut or join metal parts.Use tools ranging from common hand and power tools, such as impact drills and wrenches, to precision measuring instruments and electronic testing devices. Skills You Bring: Candidates must have prior industrial maintenance experience to qualify.Working knowledge of three phase motors, programmable controls, circuits, computer interfaces, PLC’s, VFD’s.Able to read and understand electrical schematics and blueprintsAble to read and interpret documents such as safety rules and procedure manuals.Must have working knowledge of mechanical, hydraulic and pneumatic troubleshooting.Able to use tools including hand tools, powered tools, diagnostic tools and computer programsTest and repair water distribution, and compressed air systemsAble to define problems, collect data, and draw valid conclusionsAble to operate a forklift truckBasic computer and e-mail skills Why Trulite: Trulite offers the most comprehensive benefit coverage in theindustry. Including immediate access to all health, dental, visionand life insurance for you and your family. Our commitment toyou as a member of our team also includes both Long Term andShort-Term Disability coverage to help protect you financially. Because we value your financial health, we provide not only acomprehensive wellness initiative, but we also provide financialliteracy, providing all employees with a comprehensive financialwellness program. This includes access to a percentage of yourpay daily if needed and a progressive financial training program. Stay with us for a year and your 401k employer match is 100%vested and immediately becomes part of your ever improvingfinancial plan. This is also true for those who select andcontribute to their Health Savings Account. We match on bothemployee and family coverage to help cover out-of-pocketexpenses and if unused continues to grow until need. Employermatch is also vested immediately at 100% improving yourfinancial health. Trulite bears most of the cos of your benefits. Westructured these benefits because we care not only about yourphysical wellbeing but your financial health and welfare too. Letus show you a way to financial independence while being avaluable member of our team. We are an Equal Opportunity Employer. We embrace and encourage our employees’ differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

ESSENTIAL DUTIES AND RESPONSIBILITIES Develop SQF Procedures and ensure compliance to those procedures, including direct observations of designated programs on a scheduled basis.Ensures compliance to and audits preventative controls plans and prerequisite programs.Performs GMP and internal quality audits.Assist in coordinating and participating in 3rd party and 2nd party audits, including customer, governmental, contractor, and designated inspections, as required.Implement, maintain and improve the SQF program through partnership with cross-functional groups.Controls customer complaint process, internal non-conformances and vendor deviations while assuring correction actions are administered.Conducts SQF program assessment on a scheduled basis with management team to notify of deviations, corrective actions and progress within designated programs.Train and interact with employees on SQF procedures; ensuring compliance throughout the organization.Formulate, interpret and implement company policies.Evaluate food safety concerns in facility and implement programs to eliminate hazards, based on analysis.Management of Redzone activities including updates, revisions, and documentation creation.As requested, provide food safety training and/or resources to ensure employees know how to handle food safely and attend trainingsComply with food safety practices and all applicable requirements as they pertain to SQF and that are maintainedEnsure employees are informed and held accountable for their food safety and regulatory responsibilitiesEnsure employees are positively encouraged and required to notify management about actual or potential food safety issuesEnsure employees are empowered to act to resolve food safety issues within their scope of workSupport company driven food safety improvement initiativesAdditional duties as assigned by managerSUPERVISION: N/ARELATIONSHIPSInternal: Required interaction with all employees of responsibility throughout the company.External: Required interaction with customers and other service providers.WORK ENVIRONMENTWork continually in refrigerated environment 35° F– 45° F degreesMINIMUM QUALIFICATIONS Able to work overtime as needed with or without noticeEDUCATION / TRAININGB.S. in Food Science, Science, or technical discipline. (or equivalent experience)RELATED EXPERIENCE / REQUIREMENTS3 Years Food Science, Quality Assurance or related experience. Results oriented and strong attention to detail. Ability to prioritize activities in a multi-tasked environment required. Additionally includes, but not limited to the below:Experience with PCQI, SQF or equivalent systems (certification preferred)Previous experience in food manufacturingAbility to affect change through indirect leadershipExcellent written and verbal skillsProficiency in computer usage (Outlook, Word, Excel, and PowerPoint)Ability to write SOPs and work instructKNOWLEDGE / SKILLS / ABILITIESRegular and reliable attendance is an essential function of this position.Carry out root cause analysis and drive sustained improvement at the production level.Instill a culture of operational discipline, accuracy, and compliance.PHYSICAL QUALIFICATIONSOccasionally, employee may need to work in an environment that is cool, wet, and noisy with temperatures ranging from 34 to 38 degrees Fahrenheit.Must be able to perform the following physical activities for described length of time.OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVERJOB REQUIRES WORKER TO:FREQUENCY:STAND: CONTINUOUSLYWALK : OCCASIONALLYDRIVE VEHICLE: NEVERSIT: OCCASIONALLYLIFT: 1-10 lbs (Sedentary)FREQUENTLY: 11-20 lbs (Light)FREQUENTLY: 21-50 lbs (Medium)FREQUENTLY: 51-100 lbs (Heavy): OCCASIONALLYOver 100 lbs (Very Heavy): NEVERCARRY: 1-10 lbs (Sedentary)FREQUENTLY: 11-20 lbs (Light)FREQUENTLY: 21-50 lbs (Medium)FREQUENTLY: 51-100 lbs (Heavy)OCCASIONALLY: Over 100 lbs (Very Heavy)NEVER: PUSH/PULL 1FREQUENTLY: CLIMB / BALANCE 2FREQUENTLY: STOOP/SQUATFREQUENTLY: KNEELFREQUENTLY: BENDFREQUENTLY: REACH ABOVE SHOULDEROCCASIONALLY: TWISTFREQUENTLY: GRASP OBJECTS 3CONTINUOUSLY: MANIPULATE OBJECTS 4FREQUENTLY: MANUEL DEXTERITY 5OCCASIONALLY1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $50,000/year to $80,000/year.Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

*** $1000 Signing Bonus *** As a Fricker’s manager, you will be responsible for providing outstanding leadership to the team. You should be passionate about the industry, inspiring others, coaching, training, counseling, creating a profitable environment, and delivering an exceptional guest experience. We reward and encourage exceptional performance through a friendly, fulfilling work environment. You will also enjoy many opportunities for career advancement along with great compensation and benefits. If you’re looking for exceptional challenge with opportunity for career advancement, look to Fricker’s! Management roles at Fricker’s are different from other restaurants because: Many of our guests are friendly regulars from the neighborhood and communityWe are very community oriented. We have great relationships with schools, universities, recreation leagues, and other local businesses.We hire individuals who can utilize their own management style to achieve our company’s objectives.We offer a flexible 5-day work week. Job Duties Include: Executing Fricker’s unique brand of fun, food, sports and spirits.Driving positive sales growth.Maintaining a healthy, safe, and secure environment by establishing, following and enforcing all company, federal and state food-safety, sanitation standards and procedures.Achieving optimal performance from our staff by communicating job expectations, training, scheduling, coaching, counseling, and enforcing policies & procedures.Controlling costs by monitoring food and labor efficiencies.Accomplishing staffing objectives by recruiting, selecting, and training quality individuals. Job Requirements: Must have at least two years of recent restaurant management experience preferably in a fast-casual atmosphere.Steady, stable employment track record. Minimum of 2 professional references.Outstanding interpersonal and communication skills.Positive, friendly demeanor & attitude; Customer/Guest Service FocusedAbility to stand and walk for long periods of time.Ability to lift up to 50 lbs. In addition to competitive salaries for our management roles, we provide: $1000 Signing Bonus paid after 90 days!Competitivebonus program paid monthlyComprehensive Benefit Package including medical, dental, vision, life insurance, disability insurance, and 401(k) with matchingcontributionsRewards ProgramPaid vacationFree mealsExperiencePreferred2 year(s): Full-service restaurant experienceLicenses & CertificationsPreferredServeSafeBehaviorsPreferredDedicated: Devoted to a task or purpose with loyalty or integrityEnthusiastic: Shows intense and eager enjoyment and interestTeam Player: Works well as a member of a groupMotivationsPreferredWork-Life Balance: Inspired to perform well by having ample time to pursue work and interests outside of workSelf-Starter: Inspired to perform without outside helpGrowth Opportunities: Inspired to perform well by the chance to take on more responsibilityAbility to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. He/She will maintain a diverse range of equipment including delivery vehicles, heavy duty on road tractors and trailers from a variety of manufacturers. Powered vehicle propulsion includes diesel, gasoline and alternative technology power plants (including compressed natural gas, liquefied natural gas, propane, hybrid and electrical in some locations). Automotive Technicians must be skilled in troubleshooting and maintaining various systems including hydraulic brakes, air brakes, electrical and engine control. If you're looking for an exciting career in the automotive industry, we want to hear from you!Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need. UPS offers attractive wages, benefits and paid vacations. Uniforms are also provided. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required, throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsMeets all requirements to be Power Industrial Truck Operations (PITO) certified Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A Commercial Driver's License (CDL) - PreferredWorks full time shifts: 8-10 hours per day, 4-5 days per 7-day weekDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.86 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Mason Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($36,330.00- $54,495.00) Target Bonus: % Req ID:26288 Job ResponsibilitiesPURPOSE: This role is responsible for running machines in the Aluminum Department in a safe and efficient way maximizing production.Schedule: Monday through FridayHours: 2nd shift, 2pm to 10pmJOB DESCRIPTION (DUTIES AND RESPONSIBILITIES)Uses all safety equipment on machinery as well as personal protective equipment properly.Uses appropriate measurement equipment to confirm product characteristics.Operates material handling and label making equipment.Fills out daily production reports detailing work activity and any other paperwork required per procedures.Uses hand tools to set up and adjust equipment.Versatility to move between multiple operations.Ability to troubleshoot and correct process problems.BASIC REQUIREMENTSMachine Operator experience is preferredReliable transportationFlexibility to work overtime if neededAble to communicate effectivelyMust be able to stand for an extended period of time and regularly lift and/or move up to 50 lbsAble to understand manufacturing processesMust be computer literateOperate material handling equipmentJob RequirementsPURPOSE: This role is responsible for running machines in the Aluminum Department in a safe and efficient way maximizing production.Schedule: Monday through FridayHours: 2nd shift, 2pm to 10pmJOB DESCRIPTION (DUTIES AND RESPONSIBILITIES)Uses all safety equipment on machinery as well as personal protective equipment properly.Uses appropriate measurement equipment to confirm product characteristics.Operates material handling and label making equipment.Fills out daily production reports detailing work activity and any other paperwork required per procedures.Uses hand tools to set up and adjust equipment.Versatility to move between multiple operations.Ability to troubleshoot and correct process problems.BASIC REQUIREMENTSMachine Operator experience is preferredReliable transportationFlexibility to work overtime if neededAble to communicate effectivelyMust be able to stand for an extended period of time and regularly lift and/or move up to 50 lbsAble to understand manufacturing processesMust be computer literateOperate material handling equipmentLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Become a Vital Part of Our Team – Maintenance Tech Wanted! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience.Must successfully pass a criminal background check and drug screen. Benefits of Employment: Pay Range: $18.00-$22.00/Hr.Up to 50% Rent Discount$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC6409 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 100,000 units located in 22 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Equipment Service TechnicianLocation:Marysville Auto Plant in OhioStarting Pay - $36.04 - $41.19 & $5,000 Sign on BonusWorkstyle - Onsite*Relocation assistance for candidates relocating over 50 miles*What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals.At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company which serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!About this Position:Equipment Service Technicians keeps equipment in good operating condition through effective preventative maintenance and equipment repairs. Effectively communicate technical issues with the equipment service and production teams and maintains equipment data and documentation daily.Responsibilities include:Repairing, maintaining equipment and supporting daily production.Responding to breakdowns and calls to keep production running.Supporting weekendmaintenancerepair and PM activities when necessary.Supporting a reliability centered maintenance program.Supporting team activities and contributing your own ideas.Who we are seeking:Required Work Experience:A minimum of three months of relevant experience in a manufacturing environment with a 2 year technical degree.Or a minimum of two years of relevant experience, if no degree.Required Education:High School Diploma or equivalent.Desired skills:Daily reporting and tracking of activities.Plan, Do, Check, Action follow up items.Immediate response to production floor needs and requirements.Compliance with all safety policies and regulations.Able to communicate clearly in verbal and written format.Basic knowledge of Microsoft products.Ability to be flexible and change work hours as needed.Able to analyze problems and determine root causes.Strong self-direction and drive.Capability to develop a high level a high level of expertise/aptitude in mechanical and electrical areas.Experience with Motoman robots.Experience with Omron PLCs.Additional Position Factors:Equipment inspections.Daily reporting and tracking of activities.Preventative maintenance.Continuous improvement.Other Job Specific Skills:Flexibility to work 2ndor 3rdshift long term.Flexibility to work weekends, holidays, daily overtime and off shifts as needed.Willingness to travel (percentage of travel varies between roles).Total RewardsCompetitive total compensation$5,000 Sign-on BonusHourly rate starting between $33.65- $38.451.5 OvertimeAnnual Profit Sharing Bonus OpportunityShift Premium for 2nd and 3rd shifts401k Plan with company contributionsFlexible and valuable insurance plansRelocation assistance (if relocating 50+ miles)Development to further your careerDiscount on Honda productsPaid time off and paid holidaysTo be eligible for a signing bonus, the applicant must not have been previously employed by Honda as a fulltime associate.Honda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Req ID:454657Address: 1725 Ridge Road Springfield, OH, 45502Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program* Paid Time Off * Flexible Scheduling * 401(k) – 100% Match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring ImmediatelyWelcome to Love’s!Maintenance Technicians play a crucial role in our operations by ensuring a safe, clean, and well-maintained environment. Additionally, you'll assist your manager in maintaining smooth operations to swiftly serve our customers. Your dedication significantly contributes to our customers' satisfaction and desire to return. No experience No problem! We will teach you!Job Functions:This is a customer-facing position with general customer service duties including, but not limited to, providing assistance, resolving issues, and ensuring a positive customer experience.Assisting store, restaurant, and truck care departments with general cleaning, maintenance, stocking, and customer service needs.Use of various tools and equipment to clean and maintain the overall facility operations to include, but not limited to, equipment repair and maintenance (HVAC systems, fuel systems, service trucks, refrigeration systems, etc.), pressure washing, plumbing repair, site inspections, and other assigned duties.Additional duties could include cross-training in other departments such as Store Cashier, Restaurant Cashier, Facility Maintenance, and Leadership Roles.Always put the safety and satisfaction of your customers first, complying with company safety policies & procedures.Ability to move, lift 25+ pounds. Ability to work in various temperatures.Our Culture:Come see why Love’s Travel Stops and Country Stores was recognized by Indeed as the winner of the Better Work Award in 2023.Love’s Travel Stops and Country Stores is an Equal Opportunity Employer. Veterans encouraged to apply.Love’s has been fueling customers’ journeys since 1964. Innovation and perseverance continue to lead the way for the family-owned and -operated business headquartered in Oklahoma City with more than 40,000 team members in North America and Europe. The company’s core business is travel stops and convenience stores with more than 630 locations in 42 states. Love’s continues its commitment to offer products and services that provide value for professional drivers, fleets, four-wheel customers, RVers, alternative fuel and wholesale fuel customers. Giving back to communities Love’s serves and maintaining an inclusive and diverse workplace are hallmarks of the company’s award-winning culture. The Love’s Family of Companies includes:Gemini Motor Transport, one of the industry’s safest trucking fleets.Speedco and Love’s Truck Care, the largest oil change and preventive maintenance and total truck care network.Musket, a rapidly growing, Houston-based commodities supplier and trader.Trillium, a Houston-based alternative fuels expert.TVC Pro-driver, a commercial driver’s license (CDL) protection subscription service.

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career.In this role, you will provide in-store merchandising support to Retailers to meet shoppers’ needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us What we offer:Competitive wages; $13.00 per hourGrowth opportunities abound – We promote from withinNo prior experience is required as we provide training and team support to help you succeedAdditional hours may be available upon requestWe offer benefits that can be customized to meet your family’s needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate PerksNow, about you:Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing mannerYou’re 18 years or olderCan perform physical work of moving, bending, standing and can lift up to 50 lbs.Have reliable transportation to and from work locationDemonstrate excellent customer service and interpersonal skills with our clients, customers and team membersAre a motivated self-starter with a strong bias for action and resultsWork independently, but also possess successful team building skillsHave the ability to perform job duties with a safety-first mentality in a retail environmentIf this sounds like you, we can’t wait to learn more about you. Apply Now!

ESSENTIAL DUTIES AND RESPONSIBILITIES Develop SQF Procedures and ensure compliance to those procedures, including direct observations of designated programs on a scheduled basis.Ensures compliance to and audits preventative controls plans and prerequisite programs.Performs GMP and internal quality audits.Assist in coordinating and participating in 3rd party and 2nd party audits, including customer, governmental, contractor, and designated inspections, as required.Implement, maintain and improve the SQF program through partnership with cross-functional groups.Controls customer complaint process, internal non-conformances and vendor deviations while assuring correction actions are administered.Conducts SQF program assessment on a scheduled basis with management team to notify of deviations, corrective actions and progress within designated programs.Train and interact with employees on SQF procedures; ensuring compliance throughout the organization.Formulate, interpret and implement company policies.Evaluate food safety concerns in facility and implement programs to eliminate hazards, based on analysis.Management of Redzone activities including updates, revisions, and documentation creation.As requested, provide food safety training and/or resources to ensure employees know how to handle food safely and attend trainingsComply with food safety practices and all applicable requirements as they pertain to SQF and that are maintainedEnsure employees are informed and held accountable for their food safety and regulatory responsibilitiesEnsure employees are positively encouraged and required to notify management about actual or potential food safety issuesEnsure employees are empowered to act to resolve food safety issues within their scope of workSupport company driven food safety improvement initiativesAdditional duties as assigned by managerSUPERVISION: N/ARELATIONSHIPSInternal: Required interaction with all employees of responsibility throughout the company.External: Required interaction with customers and other service providers.WORK ENVIRONMENTWork continually in refrigerated environment 35° F– 45° F degreesMINIMUM QUALIFICATIONS Able to work overtime as needed with or without noticeEDUCATION / TRAININGB.S. in Food Science, Science, or technical discipline. (or equivalent experience)RELATED EXPERIENCE / REQUIREMENTS3 Years Food Science, Quality Assurance or related experience. Results oriented and strong attention to detail. Ability to prioritize activities in a multi-tasked environment required. Additionally includes, but not limited to the below:Experience with PCQI, SQF or equivalent systems (certification preferred)Previous experience in food manufacturingAbility to affect change through indirect leadershipExcellent written and verbal skillsProficiency in computer usage (Outlook, Word, Excel, and PowerPoint)Ability to write SOPs and work instructKNOWLEDGE / SKILLS / ABILITIESRegular and reliable attendance is an essential function of this position.Carry out root cause analysis and drive sustained improvement at the production level.Instill a culture of operational discipline, accuracy, and compliance.PHYSICAL QUALIFICATIONSOccasionally, employee may need to work in an environment that is cool, wet, and noisy with temperatures ranging from 34 to 38 degrees Fahrenheit.Must be able to perform the following physical activities for described length of time.OCCASIONALLY: 1% - 33 / FREQUENTLY: 34% - 66% / CONTINUOUSLY: 67% - 100% or NEVERJOB REQUIRES WORKER TO:FREQUENCY:STAND: CONTINUOUSLYWALK : OCCASIONALLYDRIVE VEHICLE: NEVERSIT: OCCASIONALLYLIFT: 1-10 lbs (Sedentary)FREQUENTLY: 11-20 lbs (Light)FREQUENTLY: 21-50 lbs (Medium)FREQUENTLY: 51-100 lbs (Heavy): OCCASIONALLYOver 100 lbs (Very Heavy): NEVERCARRY: 1-10 lbs (Sedentary)FREQUENTLY: 11-20 lbs (Light)FREQUENTLY: 21-50 lbs (Medium)FREQUENTLY: 51-100 lbs (Heavy)OCCASIONALLY: Over 100 lbs (Very Heavy)NEVER: PUSH/PULL 1FREQUENTLY: CLIMB / BALANCE 2FREQUENTLY: STOOP/SQUATFREQUENTLY: KNEELFREQUENTLY: BENDFREQUENTLY: REACH ABOVE SHOULDEROCCASIONALLY: TWISTFREQUENTLY: GRASP OBJECTS 3CONTINUOUSLY: MANIPULATE OBJECTS 4FREQUENTLY: MANUEL DEXTERITY 5OCCASIONALLY1 (Push/Pull: Hand truck, gate, straps, metal ramp, truck door, dolly, boxes, truck gear shift)2 (Climb/Balance: In/Out Truck/Trailer to cab. On/Off ramp to ground level and side doorsteps and Platform of trailer. Stairs)3 (Grasp Objects: Hand truck, boxes, cartons, steering wheel)4 (Manipulate Objects: Boxes, dolly, metal truck ramp, hand truck, paperwork, truck gate, straps)5 (Manual Dexterity: Typing, use of office machines such as copiers, printers)Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $50,000/year to $80,000/year.Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance. To review available benefits, please click here: https://www.usfoods.com/careers/benefits.html.

Day-Shift Maintenance Mechanic | PrimientAbout PrimientPrimient is a century old company with an entrepreneurial spirit. We are a leading producer of food and industrial ingredients made from plant-based, renewable sources. We deliver value through deep technical, commercial, and operational excellence that is backed by our long-standing corn wet milling heritage. Wherever we are in the process, from field to customer, our priorities are focused on ensuring we produce the safest, highest quality products through practices that uphold both our responsibility and commitments to the challenge and drive for excellence, our people and our planet. We are a privately held company with locations across the US, Mexico, Poland, and Brazil. We’re investing in our plants and people to unlock our potential in the industrial and food sectors. Guided by our values of Safety, Excellence, Integrity, and Growth, we’re focused on growing our business, our reputation, and the career of every teammate.About the RoleWhen you are a Maintenance Mechanic at Primient in our Dayton, Ohio Plant, you will be responsible for the safe operation, mechanical maintenance, and troubleshooting of a system that produces distinctive, high-quality ingredients and solutions to the food, beverage, and other industries.Compensation for our Maintenance Mechanic role is based on a Skill Block pay-for-knowledge system with starting pay @ $34.04 per hour increasing to $36.57 per hour following successful completion of a skills evaluation. Additionally, we provide an excellent benefits package including health insurance and a 401K savings plan.Key responsibilities: Day-Shift Maintenance MechanicPerform all duties following Primient’s safety procedures.Install machinery and equipment using equipment and tools such as hoists, lifting equipment, hand tools, and power tools. Dismantles machines, moves machinery, and equipment using the above-mentioned items.Precision alignment of machines and equipment using equipment and tools such as hoists, jacks, hand tools, scales, rules, micrometers, precision levels, plumb bobs, dial indicators and laser alignment tools.Repair, perform preventative maintenance and inspection on industrial equipment such as pumps, gear boxes, fans, conveyors, and packaging equipment.Perform building and grounds maintenance.Fabricate, install, maintain, and repair utility, process and sanitary piping and plumbing systems. Uses hand and power tools and equipment to cut, solder, braze, weld, bend and thread materials used to work, and install piping and plumbing systems.Perform lubrication activities on industrial equipment such as oil and filter change, oil sampling.Work with materials necessary to fabricate, install, erect and repair metal parts and equipment.Use electric and gas welding equipment to weld, braze, heat, form, cut, and fuse items associated with this craft.Operate forklift, boom lift, and industrial moving equipment needed to perform duties.Keep tools, equipment, and work area clean and orderly.This is a 365/24/7 Operating Plant – requiring weekends and holidays.Day ShiftDay Shift operates Monday thru Friday 7:30a-4:30pAbout You* Minimum of a high school diploma or the equivalent•3+ years of maintenance experience preferred at chemical industry and/or industrial manufacturing.•Experience with installation and alignment of pumps, motors, gearboxes.•Experience rebuilding industrial pumps, compressors, gearboxes, centrifuges.•Experience working on lubrication and filtration systems.•Experience prefabbing threaded pipe and welded pipe.•Passionate about safety not only for yourself, but for your co-workers as well.Total RewardsStarting pay of $34.04/hr + overtime with opportunity to advance with our pay for skill system.We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes:Competitive Pay Multiple Healthcare plan choices Dental and vision insurance A 401(k) plan with company and matching contributions Short- and Long-Term Disability Life, AD&D, and Voluntary Insurance plans Paid holidays & vacation Floating days off Parental leave for new parents Employee resource groups Learning & development programs Fun culture where you have an opportunity in shaping our futureCareer Path & CulturePrimient is committed to a workplace that is all in – ensuring everyone has the opportunity to develop and shape a career that matters in an open culture which embraces equity, diversity and belonging. We challenge old ways of thinking; and encourage employee voices to be a guiding force for ongoing learning. Primient supports a culture of inclusion that respects individual strengths, views, and experiences. We believe our differences make better decisions, drive excellence, and deliver better business results. Primient employees experience autonomy and accountability in their role. Here, employees control their destiny as there is opportunity for career growth and pathways outside the norm.Diversity, Equity, Inclusion & BelongingWe are believers in the power of difference. We strive to represent the communities in which we operate and to provide an inclusive, welcoming environment for all. We want Primient to be a place where every employee feels they belong and knows they are seen, heard, valued and safe to speak up. Our aspiration is to unlock the full potential in diverse perspectives, while offering everyone an equal chance to grow,Primient is an equal opportunity employer, committed to the strength of an inclusive workforce.California Consumer Privacy Act ("CCPA")The Company is committed to complying with the California Consumer Privacy Act (“CCPA”) and all data privacy and laws in the jurisdictions in which it recruits and hires employees. We collect the following categories of personal information for the purpose of hiring the best qualified applicants and to comply with applicable employment laws: Name and contact information; Job preference and work availability; Social Security Number and/or other identification information; Education and qualifications; Employment history and experience; Military service; Reference and background check information, including relevant criminal history and credit history; Social media information; Pre-employment test results; Post-offer medical examination information and results, including drug test results; Voluntary self-disclosure information regarding minority, veteran, and disability status; and Information provided by you during the hiring process.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeThrough Software and Calibration, the Systems & Drivability Engineer will support testing that contributes to the integration of the full powertrain meet Honda, consumer, and regulatory requirements.Key AccountabilitiesSchedule planning, management, & reporting: Based on assignments provided from direct supervisor, propose a completion plan and review it to ensure expectations and priority are properly understood. Plan daily work to achieve objectives, notifying direct supervisor in advance of risks to meet the deadline.Learn test process: Consult with direct supervisor to understand the scope and direction for testing / calibration assignments. Follow direct supervisor's advice on what to investigate and/or confirm. Complete all testing as instructed. Complete all required training for in-house software, calibration hardware, and vehicle / facility safety.System functionality interdependencies: Consult with direct supervisor or group experts to learn how to estimate potential impacts of design changes and calibration updates.Change point verification: Work with direct supervisor to learn the overall process and the specific role of the Test Engineer. Consult with group experts to determine the starting point, what should be verified and how it should be verified for assigned part based on the vehicle change points.Internal Collaboration: Communicate with your direct supervisor at the appropriate frequency to avoid becoming stuck or to avoid excessive rework due to too much time spent working toward the wrong direction. Communicate the status of assignments in the weekly group meeting. Share concerns with direct supervisor in monthly check in meetings.Document Creation, Reporting & Follow up: Under close guidance of direct supervisor, create documentation for assigned parts, report in evaluation events, and respond to any follow up items per requested deadline.Qualifications, Experience, and SkillsBS in Mechanical, Electrical, or Chemical Engineering or equivalent experience0-2 years related experience based on educationProficient PC skills, including but not limited to excel, PowerPoint, and MatlabWorking ConditionsAssociate will work on the actual vehicle with hand and power tools. Candidate can expect to spend a portion of their time working in the lab – confirming their systems on bench, on the car, or in thermal chambers. (50%)Associate will perform analysis and documentation, then communicate findings to varying levels of management. (50%)What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

Innovate, Repair, Inspire – Your Future as a Service Tech Starts Here! Receive a $1,000 Retention Bonus! What you will be doing: We are currently looking for a hard-working and customer service minded individual with prior apartment maintenance experience to fulfill the need of a Maintenance Technician at our properties. As a Maintenance Technician at Morgan Properties, you will: Be responsible for trouble-shooting service issues including, but not limited to, HVAC, general appliance, carpentry, electrical and plumbing.Ensure that both the inside and the exterior of the property meet both company standards and applicable laws. Respond to maintenance tickets.Follow-up with residents and the office staff on status of workWork in an on-call rotation that will require night and weekend flexibility. What we’ll expect from you: Active and valid driver’s license and a personal vehicle.Live within a 30-minute commute of the properties.HVAC/EPA/CFC Certification preferred.High school diploma or GED, one-year related experience, or equivalent education and experience. Benefits of Employment: Pay Range: $18.00-$24.00/Hr.$1,000.00 retention bonus after 90 daysUp to 50% Rent DiscountProperty Staff Shared Renewal Commissions – paid monthly$300 Morgan Essentials – paid quarterlyOn-call Appreciation, $15/day for holding the on-call phoneEmployee referral payment program (up to $750)Education/Tuition Reimbursement ProgramMedical, Dental, and Vision benefitsLife/AD&D InsuranceLong- and short-term disabilityRetirement Plan - 401(k) Plan with company matchGenerous paid time off, including 10 holidays per year and sick leaveEmployee Assistance ProgramAdditional employee discounts available! #AC4513 If you are hired at Morgan Properties, your overall compensation package will also be determined based on factors such as geographic location, skills, education, and/or experience which may result in total compensation outside of this range. Get To Know Us: Established in 1985 by Mitchell Morgan, Morgan Properties is a national real estate investment and management company headquartered in Conshohocken, Pennsylvania. Jonathan and Jason Morgan represent the next-generation leaders growing the platform and overseeing the business operations.Morgan Properties and its affiliates currently own and manage a multifamily portfolio comprised of more than 350 apartment communities and over 95,000 units located in 20 states. The Company is among the three largest multifamily owners in the nation and the largest in Pennsylvania, Maryland, and New York. With over 2,500 employees, Morgan Properties prides itself on its quick decision-making capabilities, strong capital relationships, and proven operational expertise.

Overview: Installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for roll-outs of new menu items. Responsibilities: Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.Schedule and coordinate all equipment installation activities when crew leader is unavailable.Conform to all safety regulations.Raise and install evaporator cold weighing 50pounds at a height of approximately eight feet.Unload trucks and transport up to 125 lbs. over uneven surfaces.Have all necessary tools and materials required to complete job.Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.Communicate with Fire Marshalls, Mechanical Inspectors, and Health Inspectors for final C/O’s on new stores and remodels.Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical and / or Trade training preferredExperienceMinimum of two years related experience requiredLicenses/CertificationsValid Driver’s LicenseEPA certifications – license I and IITools & Equipment (Other than general office equipment):Hand tools (hammer, measuring devices, wrench, level, etc.)Power Hand tools (saws, drill press, grinders, sanders, etc.)Welding tools (torch, plasma cutter, welder, etc.)Motorized Equipment (generators, pressure washer, fork lift, etc.)Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

This position is not eligible for sponsorshipWhat Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeAt the Engineer II Career Level, you are in charge of delivering straightforward engineering assignments (i.e. testing or drawing components/simple part sets) with available guidance, while expanding the breadth of our technical knowledge and starting to deepen your expertise.Key AccountabilitiesEngineering Solution Design – Draft engineering solutions for an assigned component/simple part (or more complex parts with supervision) and the associated drawings and validation processes, to gather data and provide feedback on their feasibility, costs, quality and performance.Engineering Specifications – Carry out a range of activities under the guidance (but not direct supervision) of more senior engineers to draft engineering specifications for an assigned component/simple part and the evaluation of their effectiveness, to inform manufacturing work in the organization and/or of its suppliers. Ensure functional safety standards are met.Data Collection and Analysis - Collate and analyze data using pre-set tools, methods, and formats. Involves working independently.Integration & Correlation – Work within an established framework and with available guidance to integrate assigned parts into the vehicle. Interactions and correlations are typically at the department and division level, but may extend beyond it to correlate with other teams (i.e., design, testing, manufacturing, styling, service) for the assignment at hand.Supplier Management – Work with existing suppliers to coordinate requirements, schedule activities, and address issues in a timely manner. May lead guest (suppliers') engineers and/or contractors. There is readily available guidance and support from senior engineers and technical experts.Improvement & Innovation – Identify shortcomings in existing processes, systems, and procedures, and seek ways to optimize and do things more efficiently as a group, but especially at the individual level. Analyze and implement countermeasures to simple problems.Documentation – Prepare moderately complex documentation for review by more senior engineers to record and submit all necessary development/testing/research information as the respective activities mature.Project Management - Work within an established project management plan to achieve specific goals. May support the project schedule, coordinate project meetings, provide regular updates and reports, and contribute in meeting the project budget and timelines.Personal Development – Develop own expertise and capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching. Gain or maintain external professional accreditations where relevant to improve performance and fulfill personal potential. Build proficiency in relevant technology and increase knowledge of external regulations and industry best practices through ongoing education, conferences, and specialist publications.Qualifications, Experience, and SkillsBS in Mechanical, Aero or Automotive Engineering; BS in Industrial Design or equivalent industry experience (minimum)2+ years of relevant experiencePast experience with CAD software (CATIA V5 or V6 preferred)Proficient in Microsoft Office programsAbility to travel and work overtime as requiredWorking ConditionsPrimary working location is seated at a deskLimited lifting of parts and part dunnage maybe required on occasionOT required as necessary to achieve program deliverablesWhat differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality.Key AccountabilitiesDevelop or guide others to develop complex component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites without supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required. Delegate work appropriately.Establish or lead others to establish cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing difficult part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas and strategies.Create and manage schedule of individual work or other’s work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources without supervision. Consistently communicate project status and participate or lead project meetings, discussions, and development events.Generate advanced ideas and contribute to building comprehensive strategies that support the evolution of new technologies. Support or lead maturation of ideas to prepare for development applications with limited supervision.Support or lead market quality themes without supervision. Utilize problem-solving methods to analyze root causes. Develop and implement C/M specs as necessary without supervision. Lead recurrence prevention when appropriate.Qualifications, Experience, and SkillsRequired Work Experience:8+ years engineering experience preferably in Powersports or Automotive fieldRequired Education:Bachelor’s degree in EngineeringWorking ConditionsTravel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.Overtime: Overtime expected based on project demands/responsibilities.Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules. What differentiates Honda and make us an employer of choice Total Rewards:Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)Paid OvertimeRegional Bonus (when applicable)Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)Paid time off, including vacation, holidays, shutdownCompany Paid Short-Term and Long-Term Disability401K Plan with company match + additional contributionRelocation assistance (if eligible)Career Growth:Advancement OpportunitiesCareer Mobility Education Reimbursement for Continued LearningTraining and Development programsAdditional Offerings:Tuition Assistance & Student Loan RepaymentLifestyle AccountChildcare Reimbursement AccountElder Care SupportWellbeing ProgramCommunity Service and Engagement ProgramsProduct ProgramsFree Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!Job PurposeTo contribute to the development of functioning prototypes that will eventually become production ATV/SxS vehicles, researching and applying new technologies to support business targets and maintaining global vehicle product quality.Key AccountabilitiesDevelop complex component and system layouts for ATV/SxS prototype vehicles using computer-aided design software that achieve concept targets, function requirements, and manufacturing requisites with limited supervision. Communicate specification requirements and manufacturing control points via prototype and production drawings that result in setting the final specifications of global ATV & SxS new models and mass production vehicles. Maintain accurate technical, development, and administrative documentation as required.Establish or contribute to establishing cost targets for responsible parts that contribute to achievement of the vehicle development targets and achieve the cost targets through optimizing difficult part/system designs and offsetting any spec changes after target fix through implementation of additional cost reduction ideas.Create and manage schedule of individual work to ensure deadlines are met, coordinate resource needs with supervisor, and effectively utilize contractor resources with limited supervision. Consistently communicate project status and participate or lead project meetings, discussions, and development events.Generate high-level ideas and contribute to building strategies that support the evolution of new technologies. Support or lead maturation of ideas to prepare for development applications with limited supervision.Support market quality themes with limited supervision. Utilize problem-solving methods to analyse root causes. Develop and implement C/M specs as necessary limited supervision.Qualifications, Experience, and SkillsMinimum Educational Qualifications:Bachelors Engineering Degree in related fieldMinimum Experience:5+ years engineering experience preferably in Powersports or Automotive fieldOther Job-Specific Skills:Strong leadership, coaching and mentoring skillsAbility to interact/communicate effectively with staff/managementMust be able to operate with high level of confidentialityCompetent in FTA, FMEA, dimensional tolerance stack-ups and applicationCompetent analytical, problem solving, judgement, decision-making and prioritizationCompetent drawing and layout skills/techniques, include understanding of CAE principlesCompetent in creating a plan and scheduleCompetent in understand product development schedulesJob DimensionsNo. of Direct Reports: 0No. of Indirect Reports: 0Financial Dimensions: $0Decisions ExpectedPropose spec and drawingsPrioritization of individual workloadBalance of QCD for basic situations in individual area of responsibilityWorking ConditionsTravel: Average of 1-3 times monthly. Amount varies based on project demands/responsibilities, conferences, etc.; includes possible overseas travel.Physical: Primarily works at a desk or scope; frequent keyboarding. Limited kneeling, standing, squatting, reaching or bending.Hazards: Risks found in a typical office & shop setting. May be exposed to explosives/flammables, pressurized equipment, toxic chemicals and moving parts.Overtime: Overtime expected based on project demands/responsibilities.Maintains professional conduct and follows all departmental, safety DEPARTMENT, and COMPANY policies, Procedures, AND rules.What differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.

What Makes a Honda, is Who makes a HondaHonda has a clear vision for the future, and it’s a joyful one. We are looking for individuals with the skills, courage, persistence, and dreams that will help us reach our future-focused goals. At our core is innovation. Honda is constantly innovating and developing solutions to drive our business with record success. We strive to be a company that serves as a source of “power” that supports people around the world who are trying to do things based on their own initiative and that helps people expand their own potential. To this end, Honda strives to realize “the joy and freedom of mobility” by developing new technologies and an innovative approach to achieve a “zero environmental footprint.”We are looking for qualified individuals with diverse backgrounds, experiences, continuous improvement values, and a strong work ethic to join our team.If your goals and values align with Honda’s, we want you to join our team to Bring the Future!LocationRaymond, OhioJob PurposeSupport NA regional manufacturing Line Control system (GALC) as a business system expert by supporting the development and direction of system strategy, standardization and diffusion across all North American manufacturing plants ensuring robust, repeatable, and controlled processes are in place to maximize business value and support plant characteristics enhancement.Key AccountabilitiesSupport the development and implementation of strategies including plans & targets to standardize, improve the business operating capabilities of the GALC system for the region.Lead projects/themes of limited complexity and scope through collaboration with team (plant, IT, regional engineering) including current system enhancements and feasibility studies for future products.Work effectively with local plant departments and regional IT to ensure system standards are created, documented, and sustainedComplete testing, verification, and documentation of system changes. Confirm system requirements are met during appropriate UAT timing and assure countermeasure application on system before change release.Participate in the development of a standard training program for system use and deliver when requiredQualifications, Experience and SkillsBachelors degree related to process, manufacturing management, industrial or systems engineering or required experience2+ years' experience in Process Engineering or Manufacturing Systems with a focus on the automotive industrySystems technology experience, knowledge of process engineering, business analysis skills, project management, process project design & implementation, change management, MS Office. WorkstyleHybrid position, preferred Ohio site90% office, 10% production floor (go to the spot)Travel to plant or special assignmentWhat differentiates Honda and make us an employer of choice Total Rewards:• Competitive Base Salary (pay will be based on several variables that include, but not limited to geographic location, work experience, etc.)• Paid Overtime• Regional Bonus (when applicable)• Industry-leading Benefit Plans (Medical, Dental, Vision, Rx)• Paid time off, including vacation, holidays, shutdown• Company Paid Short-Term and Long-Term Disability• 401K Plan with company match + additional contribution• Relocation assistance (if eligible)Career Growth:• Advancement Opportunities• Career Mobility • Education Reimbursement for Continued Learning• Training and Development programsAdditional Offerings:• Tuition Assistance & Student Loan Repayment• Lifestyle Account• Childcare Reimbursement Account• Elder Care Support• Wellbeing Program• Community Service and Engagement Programs• Product Programs• Free Drinks OnsiteHonda is an equal opportunity employer and considers qualified applicants for employment without regard to race, color, creed, religion, national origin, sex, sexual orientation, gender identity and expression, age, disability, veteran status, or any other protected factor.